Smok Pen – How exactly to Change the Coil and Change the Flavour
The Smok Pen is quite the interesting new electronic writing device. This can be a pen which you can use to write on paper together with draw on with a pen or your finger. But it does so much more. It is possible to control its temperature, and you also are able to utilize it to spray an elixir of e-liquid. This article will show you how to change your Smok Pen into an incredible vaporizer.
The body of the Smok Pen is manufactured out of a durable stainless. That is why is it so nice and sturdy. However, the body of this vaporizer is covered in a fabric material that’s not heat sensitive. So it is perfect for anyone that might be allergic to heat. It also works great if you work with it on a cold day. If you are using it outside for extended periods of time, then you should consider getting a model that has a built-in compressor.
The top of the Smok Pen is constructed out of black silicone material. When you place the pen onto its heating element, it heats up the outer skin of the silicone which causes it to expand. When it does that, a small reservoir is manufactured inside the pen’s body. When you place your individual Vaporizer Pen onto the reservoir, it is possible to start vaporizing your e-liquid.
If you would like to show your Smok Pen into a vaporizer, then you need to remove the metallic plate covering the coil. On some types of Smok Pens, the plate within the coil is located between Vape Pens the tank and the body. Other models could have the plate on the bottom. If you have an authentic Smok Pen, then removing the plate will not be easy at all. Lots of people have reported that they have difficulty removing the plates, and sometimes, they even find yourself damaging their pen.
Assuming you have a genuine Smok Pen, then you should go ahead and take off the metal plate within the coil. Simply because the coil will be connected to a small metal sub-ohm tank. If you do not remove the plate, then the e-liquids which are stored within it will begin to heat up. When this happens, the e-liquids risk turning into vapor instead of turning into liquid, and you risk getting burned.
When you have removed the metallic cover, then you can access the two screws that are holding down the body of your Smok Pen. Carefully remove the screws, and then carefully take away the metal sub-ohm tank from the pen. It is important that you place your hands under the Smok Pen, as it is extremely hot. Many papers have reported that they burned their hand if they were trying to unscrew the tank. Once you have placed your hands beneath the pen, then turn on the battery and put it in the “fire” mode. It’s important that you do not start the pen while the battery is in the “fire” mode, as the battery may start to obtain hot.
After that, carefully pull the pen’s head off of the coil. You will then need to remove the entire coil from underneath of the pen, that will create a tight space where you could replace the coil. Carefully insert the brand new coil into the space. Ensure that you follow all the instructions, and that you align the new coil in the same manner because the old one was aligned. You will then start the pen and apply the airflow control switch to set the airflow. If you follow these instructions carefully, then you will not have a problem with your new airflow device.
If you have finished replacing the coil, you will have to reconnect the battery to the electrical circuit board. Your smok vaporizer will now prepare yourself again to use, and if you love it, you’ll benefit from the new airflow, and the wonderful flavours that it brings. In the event that you feel that you want to buy your own flavours, you should learn which flavours are available in the Smok Pen selection of e-liquids.